workbench blueprints | Japanese Garden Bench

workbench blueprints

Finished Bench delivered to church

A client contacted me to discuss building a bench she wanted to donate to her parish for the redesigned garden area outside the church. She considered a number of designs and chose this Japanese inspired Garden Bench. The size of the bench is 24" x 66"x 33" tall and I used clear white oak. The finish is 3 coats of spar varnish.

Most of the parts were made using 6/4 and 8/4 white oak glued up to produce the finished dimensions. This is a very heavy bench.

I chose to hand cut the tenons as opposed to cutting on a bandsaw or table saw. Recall I sold the table saw prior to our move so that option was out (obviously) and I have found that it is a lot easier for me to control the cut and much more enjoyable doing them by hand. The newly built Moxon Vise with Benchcrafted Hardware really helped out here as the new bench is yet to be made.

A very rough dry fit of one of the ends. This is one of the largest, and heaviest, projects I have built in a while.

Dry fit of the base. This gave me an idea of what the overall size was going to be and figured out at this point is was time to start assembling the bench on the floor.

Starting the assembly and doing the final sizing of the back slats. Overall the are 40+ mortise and tenon joints in the bench. Not shown are the 6 seat slats which were attached with SS screws and plugs cut from white oak. The plans are from FWW and the designer is Russell Jensen.

I really enjoyed the challenge of building a this project and the church was very happy to receive it. The combination of white oak and spar varnish should help this bench serve the parishioners for many years.

Do you find information about workbench blueprints are you looking for? If not, below may help you find more information about the workbench blueprints. Thank you for visiting, have a nice day.

 

Related Posts by Categories